Encoders Absolute multiturn
|
|
-
Data sheet
DE EN FR
Intelligent Scan Technology™ – powerful and economical at the same time.
The absolute encoders Multiturn Sendix F5863 / F5883 with patented Intelligent Scan Technology™ and SSI or BiSS interface are particularly high-resolution optical encoders without gears with 100% magnetic insensitivity. 41 bit total resolution, through hollow shaft up to 15 mm and variants with additional SinCos or RS422 incremental track.
- Technical data
- Benefits
- Downloads
- Accessories
- Cables and connectors
| Mechanical | |
|---|---|
| Dimension | Ø 58 mm |
| Shaft type | 10 mm hollow shaft, through 12 mm hollow shaft, through 14 mm hollow shaft, through 15 mm hollow shaft, through 3/8 " hollow shaft, through 1/2 " hollow shaft, through |
| Flange type | Ø 46.00 mm Ø 58.00 mm Ø 63.00 mm Ø 65.00 mm |
| Working temperature | -40 °C ... +85 °C |
| Protection level | IP65 IP67 |
| Connection types | Radial cable Tangential cable M23 connector radial M12 connector radial |
| Max. rotational speed | 9.000 min-1 |
| Weight | 450 g |
| Electrical | |
|---|---|
| Scanning | optical |
| Resolution max. | 2.048 ppr incremental 17 bits singleturn 24 bits multiturn |
| Power supply | 5 V DC 10...30 V DC |
| Interfaces | SSI, binär SSI, gray SSI + 2048 ppr SinCos SSI + 2048 ppr RS422 BiSS |
Reliable and insensitive
- Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
- Due to IP67 protection and wide temperature range from -40°C to +85°C also suitable for outdoor use.
- Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 41 bit and 100% magnetic insensitivity.
Versatile
- Available with SSI or BiSS interface and combined with SinCos incremental signals.
- The right fastening solution or type of connection is available for every application.
- Set button and LED for easy commissioning.
- High-resolution feedback in real time via SinCos and RS422 incremental outputs.
- Short control cycles, clock frequency SSI up to 2 MHz / BiSS up to 10 MHz.
| Data sheet | ||
|---|---|---|
| Sendix F5863 / F5883 PDF ∼ 1,3 MB | 02.2024 | DE EN FR |
| Operation Manual | ||
|---|---|---|
| Operating manual for encoders with ATEX 2/22 Multilingual: German, English, French, Italian, SpanishPDF ∼ 3,6 MB | 05.2023 | | |
| Operation manual for encoders Multilingual: German, English, FrenchPDF ∼ 2,9 MB | 09.2022 | |
| Safety characteristics | ||
|---|---|---|
| Sendix F5883 MTTFd Multilingual: German, EnglishPDF ∼ 158,8 KB | 06.2019 | |
| Declaration of conformity | ||
|---|---|---|
| Sendix F5863 / F5883 CE Multilingual: German, English, FrenchPDF ∼ 384,0 KB | 04.2016 | |
| Device file | ||
|---|---|---|
| BiSS EDS ZIP ∼ 1,4 KB | 07.2021 | |
| Mechanical CAD / STEP | ||
|---|---|---|
| Sendix F5883 ZIP ∼ 6,4 MB | 12.2014 | |
| Electronic CAD / ePlan | ||
|---|---|---|
| Sendix F5863 / F5883 ZIP ∼ 4,4 MB | 02.2020 | |
| Product Certificates | ||
|---|---|---|
| Encoder UL Canada PDF ∼ 79,9 KB | 11.2019 | EN | |
| Encoder UL USA PDF ∼ 78,2 KB | 11.2019 | EN | |
| Salt spray test ManufacturersDeclaration PDF ∼ 39,6 KB | 05.2023 | DE EN |
| Brochures | ||
|---|---|---|
| BiSS PDF ∼ 2,8 MB | 10.2022 | DE EN |
Accessories
Stator coupling
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 mm
For lateral mounting on the encoder flange.
For applications with axial and radial play at high dynamics.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
| 8.0010.1602.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.1602.0000 |
Torque stop, flexible
For hollow shaft encoders
with flange ø 58 mm
Mounting radius 39.5 ... 142.75 mm
Designed for functional safety technology.
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 M3x6 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 1 screw
| 8.0010.4047.00FS |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.4047.00FS | |
| Operation Manual 8.0010.4047.00FS - Accessories torque stop, flexible (FS) |
Fastening arm set, rigid
For hollow shaft encoders
with flange ø 58 mm
Mounting radius 32.5 ... 143.5 mm
Designed for functional safety technology.
For applications with very low axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 screws M3x6 for mounting to the encoder
Connection to the application (not included in delivery)
- 1 torque pin 8.0010.4049.0075
| 8.0010.4051.00FS |
| Mechanical CAD / STEP 8.0010.4051.00FS | |
| Operation Manual 8.0010.4051.00FS - Accessories torque stop, rigid (FS) |
Stator coupling (FS)
For hollow shaft encoders
with flange ø 58 mm
Mounting radius 31.5 mm
Designed for functional safety technology by 4-screw principle.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws M3x6 for mounting to the encoder
Connection to application (not included in delivery)
- 4 screws
| 8.0010.40B2.00FS |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.40B2.00FS | |
| Operation Manual Supplement to stator coupling operating instructions (FS) |
Fastening arm, medium (flexible)
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 ... 45.75 mm
For applications with axial and radial play with constant rotary movements.
Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 1 screw
| 8.0010.40E0.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.40E0.0000 |
Stator coupling
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.5 mm
For lateral mounting on the encoder flange.
For applications with axial and radial play at high dynamics.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
| 8.0010.40L0.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.40L0.0000 |
Fastening arm, short (flexible)
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 32.25 mm
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 1 screw
| 8.0010.40M0.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.40M0.0000 |
Spring tether element
For hollow shaft encoders
with flange ø 50 ... 58 mm
For applications with low radial and axial play and low dynamics.
Scope of delivery
- Wire spring element
- 1 screw for mounting on the encoder.
Connection to the application (not included in delivery)
- 1 screw
| 8.0010.40W0.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
Torque pin, long with fastening thread
For hollow shaft encoders
with flange ø 36 ... 58 mm
With mounting thread.
Suitable for:
- Spring element short (8.0010.4H00.0000)
- Spring element long (8.0010.4I00.0000)
| 8.0010.4700.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
Stator coupling, double-winged
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 31.5 mm
For lateral mounting on the encoder flange. For applications with high accuracy requirements.
Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 2 screws
| 8.0010.4D00.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.4D00.0000 |
Spring element, short
For hollow shaft encoders
with flange ø 36 ... 58 mm
Mounting radius 16 ... 27 mm
For applications with limited axial play at low dynamics and limited installation space.
Scope of delivery
- Spring element (plastic)
- 1 screw for mounting on the encoder
Connection to the application (not included in delivery)
- Parallel pin 8.0010.4700.0000
| 8.0010.4H00.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.4H00.0000 |
Spring element, long
For hollow shaft encoders
with flange ø 36 ... 58 mm
Mounting radius 30.7 ... 36.7 mm
For applications with high axial play, at low dynamics.
Scope of delivery
- Spring element (plastic)
- 1 screw for mounting on the encoder
Connection to the application (not included in delivery)
- Parallel pin 8.0010.4700.0000
| 8.0010.4I00.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.4I00.0000 |
Fastening arm, long, (flexible)
For hollow shaft encoders
with flange ø 50 ... 58 mm
Mounting radius 36.5 ... 85 mm
For applications with axial and radial play at low dynamics.
Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 1 screw
| 8.0010.4R00.0000 |
| Data sheet Accessories hollow shaft encoder | DE EN FR |
| Mechanical CAD / STEP 8.0010.4R00.0000 |
Cables and connectors
M12 Connector with cable ,
Preassembled cable set
Female connector 8-pinPVC Ø 6,7 mm ± 0,2 mm
8 x 0,25 mm2
05.00.6041.8211.XXXM
| Data sheet M12 cordset, PVC, socket, 8-pin, A-coded, open end | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Female connector 8-pinPVC Ø 6,7 mm ± 0,2 mm
8 x 0,25 mm2
05.00.6041.8311.XXXM
| Data sheet M12 cordset, PVC, female 8-pin, A-coded, angled, open end | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Female connector 8-pinPUR Ø 6,3 mm ± 0,2 mm
8 x 0,25 mm2
05.00.6051.8211.XXXM
| Data sheet M12 cordset, PUR, socket, 8-pin, A-coded, open end | DEENFR |
M12 Connector with cable ,
Preassembled cable set
Female connector 8-pinPUR Ø 6,2 mm ± 0,2 mm
4 x 2 x 0,25 mm2
05.00.60E1.8211.XXXM
| Data sheet M12 cordset, PUR, socket, 8-pin, A-coded, open end | DEENFR |
M12 Connector ,
Field-wireable connector
Female connector 8-pin
05.CMB 8181-0
| Data sheet M12 socket, 8-pin, A-coded | DEENFR |
M23 Connector ,
Field-wireable connector
Female connector 12-pin
8.0000.5012.0000
| Data sheet M23 connector, socket, 12-pin, counting direction cw | DEENFR |
M23 Connector with cable ,
Preassembled cable set
Female connector 12-pinPVC Ø 7,3 mm ± 0,2 mm
6 x 2 x 0,14 mm2
8.0000.6901.XXXX.0031
| Data sheet M23 cable set, PVC, socket, 12-pin, counting direction cw, end open | DEENFR |
M23 Connector with cable ,
Preassembled cable set
Female connector 12-pin
↓
Male connector 12-pinPVC Ø 7,3 mm ± 0,2 mm
6 x 2 x 0,14 mm2
8.0000.6905.XXXX.0032
| Data sheet M23 cable set, PVC, socket, 12-pin, counting direction cw + pin, counting direction ccw | DEENFR |
Cable 6 x 2 x 0,14 mm2 , for the Ex-area
Unassembled by the meter
PUR Ø 7,80 mm ± 0,20 mm
6 x 2 x 0,14 mm2
8.0000.6Q00.0000
| Product Certificates 8.0000.6Q00.XXXX ATEX / Report | DEEN |
| Data sheet Cable, 12-core, PUR | DEENFR |
„Do you have technical questions about Kübler encoders or are you looking for individual solutions? We at Application Support are here for you.“
Application support
Rainer Grueninger
Application Engineer
support@kuebler.com
+49 7720 3903 849
„We will be pleased to give you information about prices and delivery times. We are looking forward to your inquiry.“
Sales
Fritz Kübler GmbH
Sales Germany
info@kuebler.com
+49 7720 3903 871
+49 7720 21564
