Encoders Absolute multiturn
|
|
-
Data sheet
DE EN FR
Intelligent Scan Technology™ – powerful and economical at the same time.
The absolute encoders Multiturn Sendix F5863 / F5883 with patented Intelligent Scan Technology™ and SSI or BiSS interface are particularly high-resolution optical encoders without gears with 100% magnetic insensitivity. 41 bit total resolution, through hollow shaft up to 15 mm and variants with additional SinCos or RS422 incremental track.
- Technical data
- Benefits
- Downloads
- Accessories
| Mechanical | |
|---|---|
| Dimension | Ø 58 mm |
| Shaft type | 6 mm shaft, with flat surface 10 mm shaft, with flat surface 1/4 " shaft, with flat surface 3/8 " shaft, with flat surface |
| Flange type | Synchro flange / Servo flange Clamping flange Ø 58.00 mm |
| Working temperature | -40 °C ... +85 °C |
| Protection level | IP65 IP67 |
| Connection types | Axial cable Radial cable M23 connector axial M23 connector radial M12 connector axial M12 connector radial |
| Max. rotational speed | 12.000 min-1 |
| Weight | 450 g |
| Electrical | |
|---|---|
| Scanning | optical |
| Resolution max. | 2.048 ppr incremental 17 bits singleturn 24 bits multiturn |
| Power supply | 5 V DC 10...30 V DC |
| Interfaces | SSI, binär SSI, gray SSI + 2048 ppr SinCos SSI + 2048 ppr RS422 BiSS |
Reliable and insensitive
- Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
- Due to IP67 protection and wide temperature range from -40°C to +85°C also suitable for outdoor use.
- Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 41 bit and 100% magnetic insensitivity.
Versatile
- Available with SSI or BiSS interface and combined with SinCos incremental signals.
- The right fastening solution or type of connection is available for every application.
- Set button and LED for easy commissioning.
- High-resolution feedback in real time via SinCos and RS422 incremental outputs.
- Short control cycles, clock frequency SSI up to 2 MHz / BiSS up to 10 MHz.
| Data sheet | ||
|---|---|---|
| Sendix F5863 / F5883 PDF ∼ 1,3 MB | 02.2024 | DE EN FR |
| Operation Manual | ||
|---|---|---|
| Operating manual for encoders with ATEX 2/22 Multilingual: German, English, French, Italian, SpanishPDF ∼ 3,6 MB | 05.2023 | | |
| Operation manual for encoders Multilingual: German, English, FrenchPDF ∼ 2,9 MB | 09.2022 | |
| Safety characteristics | ||
|---|---|---|
| Sendix F5863 MTTFd Multilingual: German, EnglishPDF ∼ 186,4 KB | 06.2019 | |
| Declaration of conformity | ||
|---|---|---|
| Sendix F5863 / F5883 CE Multilingual: German, English, FrenchPDF ∼ 384,0 KB | 04.2016 | |
| Device file | ||
|---|---|---|
| BiSS EDS ZIP ∼ 1,4 KB | 07.2021 | |
| Mechanical CAD / STEP | ||
|---|---|---|
| Sendix F5863 ZIP ∼ 6,1 MB | 12.2020 | |
| Electronic CAD / ePlan | ||
|---|---|---|
| Sendix F5863 / F5883 ZIP ∼ 4,4 MB | 02.2020 | |
| Product Certificates | ||
|---|---|---|
| Encoder UL Canada PDF ∼ 79,9 KB | 11.2019 | EN | |
| Encoder UL USA PDF ∼ 78,2 KB | 11.2019 | EN | |
| Salt spray test ManufacturersDeclaration PDF ∼ 39,6 KB | 05.2023 | DE EN |
| Brochures | ||
|---|---|---|
| BiSS PDF ∼ 2,8 MB | 10.2022 | DE EN |
Accessories
Bellows coupling
Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.
Bellows coupling (stainless steel).
| 8.0000.1102.0606 |
| Data sheet Bellows and spring washer couplings | DE EN FR |
| Mechanical CAD / STEP Bellows and spring washer couplings |
Assembly bell
For shaft encoders with flange ø 50 ... 58 mm
Fast encoder mounting. Electrical and thermal insulation through glass-fibre reinforced plastic and insulating spring washer coupling - complete delivery as a set.
Scope of delivery
- Mounting bell
- Spring washer coupling (8.0000.1401.XXXX)
- Mounting eccentric (8.0000.4B00.0000)
- Mounting accessories
| 8.0000.4500.XXYY |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0000.4500.XXXX |
Adapter flange, square, 4 mm
For shaft encoders with clamping flange ø 50 ... 58 mm
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 4 screws
| 58,0 mm x 4 mm | 8.0010.2100.0000 |
| 63,5 mm x 3 mm | 8.0010.2120.0000 |
| 70,0 mm x 10 mm | 8.0010.2600.0000 |
| 80,0 mm x 4 mm | 8.0010.2800.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2100.0000 |
Flange, Ø 115mm Euroflange
For shaft encoders with flange ø 50 ... 58 mm
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder
Connection to the application (not included in delivery)
- 6 screws
| Drehgeber 580x/5000 | 8.0010.2160.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2160.0000 |
Flange, Ø 58mm
For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange.
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
| 8.0010.2180.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2180.0000 Accessories flange / CAD |
Flange, Ø 65mm
For shaft encoders with flange ø 50 ... 58 mm
With this flange adapter, Kübler encoders of size 58 mm can replace third-party encoders of size 65 mm.
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder
Connection to the application (not included in delivery)
- 3 screws
| 8.0010.2230.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2230.0000 |
Flange, Ø 90mm
For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange. Mechanically compatible with encoder type 9000.
Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder
Connection to the application (not included in delivery)
- 6 screws
| 8.0010.2270.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2270.0000 |
Angular flange
For shaft encoders with flange ø 50 ... 58 mm
Scope of delivery
- Angle flange (aluminium)
- 3 screws for fastening to the encoder.
Connection to the application (not included in delivery)
- 2 screws
| 8.0010.2300.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.2300.0000 |
Fastening eccentrics
For shaft encoders with synchro flange ø 50 ... 70 mm
Scope of delivery
- 3 eccentric
- 3 screws
| 8.0010.4100.0000 |
| Data sheet Accessories shaft encoders | DE EN FR |
| Mechanical CAD / STEP 8.0010.4100.0000 |
Bearing box
For shaft encoder with clamping flange ø 58 mm and shaft 10 x 20 mm
When the encoder is driven by a toothed or chain wheel, V-belt or toothed belt, impeller, etc., the permissible axial or radial shaft loads are usually exceeded during operation. For these cases, the bearing box equipped with reinforced bearings is ideally suited.
Scope of delivery
- Bearing box with lock and O-ring
- Coupling for shaft 10 mm
- Adapter flange 8.0010.2100.0000
- Mounting accessories
| 8.0010.8200.0004 |
| Data sheet Bearing box | DE EN FR |
Robust bearing unit
For shaft encoders with clamping flange ø 50 ... 58 mm and shaft 10 mm
The separation of the bearing load and the sensor system provides the encoder with additional protection in harsh environments.
Scope of delivery
- Robust bearing unit
- 3 x cheese head screw M4x25 (SW3)
- 1 x O-ring
| 8.0010.8200.000C |
| Data sheet Robust bearing unit | DE EN FR |
| Installation manual Robust bearing unit |
Cables and connectors
„Do you have technical questions about Kübler encoders or are you looking for individual solutions? We at Application Support are here for you.“
Application support
Rainer Grueninger
Application Engineer
support@kuebler.com
+49 7720 3903 849
„We will be pleased to give you information about prices and delivery times. We are looking forward to your inquiry.“
Sales
Fritz Kübler GmbH
Sales Germany
info@kuebler.com
+49 7720 3903 871
+49 7720 21564
